Horizon Fitness 7.4AT Owner's Manual page 16

ASSEMBLY STEP 6 - MOVING TREADMILL
16
1
2
6.1 To move, make sure the treadmill is folded and securely
latched. Then firmly grasp the handlebars, tilt the
treadmill back (1) and roll (2).
6.2 Move treadmill off flattened box and into its final
position, ready for use. Dispose of cardboard box.
NOTE: If treadmill must be disassembled or lifted in the
future, use the 5mm L-wrench to re-attach red transport
cables to the upper deck frame and lower base frame on
both the left side and right side of the treadmill. Check
to ensure that the lower base frame cannot spring open
before lifting or disassembling treadmill.
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE section in
the TREADMILL GUIDE.