Taylor 793 Operator's Manual page 21

Step 12
Slide the fork of the draw handle into the slot of the
draw valve, starting from the right. Slide the pivot pin
through each draw handle as you insert them into
the draw valves. Secure with pivot pin.
Figure 15
Step 13
Snap the design cap over the end of the center door
spout.
Figure 16
Model 793
Step 14
Install the front drip tray and the splash shield under
the door spouts.
Step 15
Install the drip pan.
Step 16
Slide two o-rings on one end of the air tube. Slide
two o-rings on the other end of the air tube.
17
Figure 17
Figure 18
Figure 19
Operating Procedures