Advertisement
Quick Links
Quadratec
Tire Bump Stop Kit
Installation Manual: for 2007-Current Wrangler JK & JL
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS AND
PROCEDURE NOTICES BEFORE ATTEMPTING TO INSTALL OR USE THIS
PRODUCT. FOLLOW ALL INSTRUCTIONS AND WARNINGS WITH PRODUCT &
VEHICLE OWNERS MANUAL.
PLEASE CONSULT YOUR VEHICLE'S OWNER MANUAL FOR THE MAXIMUM
SPARE TIRE WEIGHT YOUR VEHICLE IS DESIGNED TO SUPPORT. IF YOU
EXCEED THE MAXIMUM WEIGHT, THEN ADDITIONAL SUPPORT BELOW THE
SPARE TIRE IS STRONGLY RECOMMENDED.
RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT ALL TIMES
WHILE INSTALLING OR MAINTAINING THIS PRODUCT. TORQUE AND
RECHECK FASTENERS AFTER 250 MILES AND FREQUENTLY THEREAFTER.
INSPECT BUMPER AND HITCH BEFORE USE.
Tailgate Spare
®
#16053.5300
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Quadratec 16053.5300
Summary of Contents for Quadratec 16053.5300
- Page 1 ® Tire Bump Stop Kit Installation Manual: for 2007-Current Wrangler JK & JL #16053.5300 TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE: READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO INSTALL OR USE THIS PRODUCT.
- Page 2 If any part is missing or broken, please Congratulations on your purchase of call Customer Service at 800-745-6037 the Quadratec Tailgate Spare Tire Bump as soon as possible. Regarding Winch Stop Kit for '07 + JK & JL. This custom...
-
Page 3: Required Tools
REQUIRED TOOLS: KIT CONTENT LIST: A. Bump Stops Qty 2 Safety Glasses 1/8" Phillips Screw Driver T30 Torx Bit Hack Saw Mechanics Gloves (Part #95115.0001) - Page 4 Bump Stops Installation: BEFORE BEGINNING INSTALLATION, THE VEHICLE MUST BE PARKED ON A HARD AND LEVEL SURFACE, WITH THE TRANSMISSION IN PARK (6TH GEAR FOR A MANUAL TRANSMISSION), THE PARKING/EMERGENCY BRAKE ON AND THE EINGINE OFF. FIG 1 FIG 2 Put on Safety Glasses.
- Page 5 Bump Stops Installation: STEP A FIG 5 FIG 6 Wet a paper towel and wipe the tip with ease of installation. [FIGs 5&6] of the Bump Stop and the hole to help FIG 1 FIG 8 FIG 7 Using a 1/8" Phillips screwdriver, gently It should lock in place without much insert the screwdriver into the Bump pressure.
-
Page 6: Three Year Limited Warranty
United States, Quadratec Other Limitations - Exclusion of Damages - warrants to the initial retail purchaser only that your Quadratec accessory shall be free of Your Rights Under State Law: defects in material and workmanship: for a...
Need help?
Do you have a question about the 16053.5300 and is the answer not in the manual?
Questions and answers