Remote Control - ElectrIQ iQool9PLUS User And Installation Manual

REMOTE CONTROL

The remote control has a range of up to 8m. Point the remote control at the
receiver in the interior unit. A beep confirms that the remote control signal has
been received.
REMOTE OPERATION
Turn the appliance on using the ON/OFF button. This activates the most
recently used setting.
The ON/OFF button also turns the air conditioner off.
*Horizontal swing not available on most models and the horizontal direction
must be adjusted manually.
BUTTONS
Button Function
Power Press to turn the unit on or off.
Press to activate turbo mode. This will make the unit work in high performance mode
to quickly cool or heat the room for a period of 15 minutes. The fan will be set to max,
Turbo
the temperature will be set to either 16
Press and hold for 5 seconds to change between Fahrenheit and Celsius.
Mute Press to reduce the fan speed to produce the lowest possible wind noise.
Mode Press to change between the different modes.
Press to turn eco mode on or off.
Eco In cooling mode eco mode slowly increases the desired temperature by 2
heating mode eco mode slowly decreases the desired temperature by 2
Timer Press to set the timer.
Press to increase the desired room temperature or adjust the timer duration.
Press to decrease the desired room temperature or adjust the timer duration.
Select the vertical direction of airflow (Model dependant)
Select the horizontal direction of airflow (Model dependant)
Fan Press to select the fan speed between LOW, MED and HIGH.
Display Press to turn on/off the LED display.
Press to activate the "SLEEP" function
Sleep
Anti- Press to activate the anti-mildew function. When activated the fan will run for a period
Mildew after cooling operation to dry out the indoor unit.
I Feel Press to activate the follow me function.
Clean Press to activate the cleaning function.
Health Press to activate the ioniser function (Not applicable)
OPERATION
o
C in cooling mode or 31
7
o
C in heating mode.
o
C. In
o
C