Remote Control - ElectrIQ iQool-3MS9K9K9K User And Installation Manual

REMOTE CONTROL

The remote control has a range of up to 8m. Point
the remote control at the receiver in the interior unit.
A beep confirms that the remote control signal has
been received.
REMOTE OPERATION
Turn the appliance on using the ON/OFF button. This
activates the most recently used setting.
The ON/OFF button also turns the air conditioner off.
*Horizontal swing not available on most models and
the horizontal direction must be adjusted manually.
No. Button Function
1 Down Press to decrease the desired room temperature.
2 Up Press to increase the desired room temperature.
3 Power Press to turn the unit on or off.
4 Fan Press to select the fan speed between LOW, MED and HIGH.
5 Timer Press to set the timer.
Press to activate the "SLEEP" function
6 Sleep
Press to turn eco mode on or off.
7 Eco In cooling mode eco mode slowly increases the desired temperature by 2
In heating mode eco mode slowly decreases the desired temperature by 2
8 Mode Press to change between the different modes.
Press to activate turbo mode. This will make the unit work in high
performance mode to quickly cool or heat the room for a period of 15
9 Turbo
minutes. The fan will be set to max, the temperature will be set to either
16
Select the vertical direction of airflow (Horizontal direction not adjustable on
10 Swing
these models)
11 Mute Press to reduce the fan speed to produce the lowest possible wind noise.
12 Display Press to turn on/off the LED display.
13 Health Press to activate the ioniser function (Not applicable)
14 I Feel Press to activate the follow me function.
Press to activate the child lock function. All buttons on the remote are locked
15
until the child lock is deactivated.
(MODE+TIMER)
o
C in cooling mode or 31
o
C in heating mode.
7
o
C.
o
C