Remote Control - ElectrIQ ECOSILENT8W Manual

REMOTE CONTROL

MULTI PROTECTIVE FUNCTIONS
FROST PROTECTION
In COOL, DRY or SMART COOL modes, if the temperature of the exhaust is too low, the machine will
automatically stop operating until the temperature has risen.
OVERFLOW PROTECTION
When the water in the internal water tank exceeds the warning level, the machine will stop operating and
sound an alarm with the LCD display showing "E7". To resume operation empty the internal water tank. After
the water is emptied, the machine will automatically return to the original state.
AUTO-DEFROST
The machine has automatic defrosting function. If during operation the temperature of the internal coils
drops too low, the unit will enter auto defrost and the heating symbol will flash on the control panel.
AUTOMATIC THERMAL PROTECTION
To protect the service life of the machine, the machine has automatic thermal protection. If the temperature
within the unit is outside of the specified range, the compressor and the lower motor will stop operation.
The appliance will automatically return to normal operation after the temperature of the machine recovers.
COMPRESSOR PROTECTION
To prevent damage to the compressor there is a 3 minute delay start protection function.
POWER
Press to turn the unit on or off.
TIMER Press to set the timer.
Press to decrease the desired temperature or
DOWN
timer duration.
Press to increase the desired temperature or
UP
timer duration.
SLEEP Press the sleep button to enter sleep mode.
FAN Press to enter fan / air purify mode.
COOL Press to enter cool mode.
DRY Press to enter dry (dehumidify) mode.
HIGH Press to enter high (F5) speed fan.
LOW Press to enter low (F1) speed fan.
NOTE: The design of the remote may vary from the diagram, due to
continuous product improvement.
9