Remote Control - ElectrIQ SILENT16-V2 User Manual

REMOTE CONTROL

The air conditioner can be controlled with the remote control. Two AAA-batteries are required to use the
remote control.
POWER : Press the POWER button to turn the machine on and off.
MODE : Press the MODE button to switch between cooling, fan,
Dehumidify modes.
UP : press the UP button to increase the desired temperature and set the
duration of the timer.
DOWN : press the DOWN button to reduce the desired temperature and
set the duration of the timer.
FAN : Press the FAN button to cycle between high, medium and low fan
speeds.
TIMER : Press the TIMER button to set the duration of the power on or
power off timer..
SWING : Press the swing button to change the orientation of the louvres
to direct the air
TEMPERATURE UNIT
temperature in Celsius and Fahrenheit.
SLEEP MODE
energy saving logic and the lowest fan speed.
MULTI PROTECTIVE FUNCTIONS
OVERFLOW PROTECTION FUNCTION
When the water in the internal water tank exceeds the warning level, the machine will
automatically sound an alarm, and the Full light will illuminate. At this point, you need to
empty the internal water tank. After the water is emptied, the machine will automatically
return to the original state.
AUTOMATIC DEFROSTING (COOLING MODELS HAVE THIS FUNCTION)
The machine has automatic defrosting function: during defrosting, heating symbol on the
display screen will flash.
AUTOMATIC THERMAL PROTECTION
To protect the service life of the machine, the machine has automatic thermal protection.
During the protection period, the compressor and the lower motor will stop operation and will
automatically return to normal heating state after the temperature of the machine recovers.
PROTECTION FUNCTION OF THE COMPRESSOR
To increase the service life of the compressor, it has a 3- minute delay start protection
function.
: Press to switch between displaying the
: Press to turn on the sleep mode. The unit will work with
Page 9 of 14