Advertisement
Assembly
STEP 1: Attach the Bracket to the Tabletop
Method A: Progressive Desk tabletop
Line up the Bracket (A1) with the predrilled holes on the underside of the tabletop and insert the M6x18 machine screws
and washers included with your tabletop. Use the Allen Wrench included with your tabletop to tighten each machine screw
to secure the bracket to the tabletop.
Method B: Third-Party Tabletop
Position the Bracket (A1) so that the wider flange side is 2.87" further from the edge than the narrow side to center the
bracket on the tabletop. Mark all five holes' location. Use a power drill with a 5/32" drill bit to drill a hole 0.5" deep at each
location. Install 5x S5x20 Wood Screws (B1).
M6x18
M6 Washer
A1
P a g e | 7
Advertisement
