Advertisement
Assembly
STEP 4: Connect Cables
Connect the Remote (A4) to the HS port of the Control Box (A5).
Connect the Power Cord (A6) to the Control Box (A5).
Connect the Cable from the Leg (A2) to the M1 Port of the Control Box (A5). Connect the Extension Cable (A7) to the Leg
cable if the Leg Cable is not long enough to reach the Control Box (A5).
Secure and organize cables as desired.
STEP 5: Install the Base Plate to the Leg
Place the Base Plate (A3), with the feet facing upwards, onto the leg and secure using 4x M6x16 Counter Sunk Machine
Screws (B3). Tighten screws with Allen Wrench (B4) and ensure the screws are flush with the surface of the base plate.
STEP 6: Flip the Table Lift Upright and Initiate the Reset Procedure
After flipping the table life upright, adjust the leveling feet to level the table. Proceed to the reset procedure after leveling. It
is critical that the reset procedure is completed before using the table lift.
B3
A3
P a g e | 9
Advertisement
