Table of Contents Caution Specifications Dimensional Drawing Components Assembly Operations Troubleshooting Have any queries? Our expert engineers are here to help! sales@progressivedesk.com 1-800-828-9414 progressivedesk.com P a g e | 2...
Caution Warning Ensure no obstacles are in the desk's path. Ensure the Pinch Point tabletop is not touching any walls. Ensure all cords are Keep hands and appropriate length to accommodate the change in height. fingers clear. Keep children away from electric height-adjustable desks, control units, and handsets. There is a risk of injury and electric shock.
Components Important: The drawings below are for reference only and may be slightly different from the physical product. Please contact us if you have missing or damaged components. Tools You Will Need Phillips Head Screwdriver Included Allen Wrench (B4) Tape Measure and/or Electric Driver Part Qty.
Assembly STEP 1: Attach the Bracket to the Tabletop Method A: Progressive Desk tabletop Line up the Bracket (A1) with the predrilled holes on the underside of the tabletop and insert the M6x18 machine screws and washers included with your tabletop. Use the Allen Wrench included with your tabletop to tighten each machine screw to secure the bracket to the tabletop.
Page 8
Assembly STEP 2: Install the Leg to the Bracket Insert the Leg (A2) into the Bracket and align the holes. Secure with 4x M6x10 Machine Screws (B2) using Allen Wrench (B4). STEP 3: Secure and connect the Remote and Control Box Place the Remote (A4) and Control Box (A5) at the desired location and mark all four holes’...
Page 9
Assembly STEP 4: Connect Cables Connect the Remote (A4) to the HS port of the Control Box (A5). Connect the Power Cord (A6) to the Control Box (A5). Connect the Cable from the Leg (A2) to the M1 Port of the Control Box (A5). Connect the Extension Cable (A7) to the Leg cable if the Leg Cable is not long enough to reach the Control Box (A5).
Operations Normal Operation Using the wired remote, press and hold the 'Up' button to raise the table lift. To lower the table lift, press and hold the 'Down' button. The 'Up' and 'Down' buttons are momentary controlled, when they are released, the table lift will stop immediately.
Troubleshooting Troubleshooting Guide Problem Possible Cause Corrective Action Low power mode activated Press any button on the remote and LED will activate. Remote LED Disconnect and reconnect the RJ-45 remote connector. is off. Connection issue Ensure connection is secure and cable is not damaged. Follow "Setting Limit Switches"...