Advertisement
Assembly & Installation
Text Here
Step 1: Assemble the Base
F (x1)
G (x1)
H (x5)
Gas Lift
Base
Casters
Cylinder
Firmly insert the 5x Casters (H) into the bottom of the Base (G), then insert the Gas Lift Cylinder (F) into the top of
the Base (G) with the rod side up.
Step 2: Attach the Armrests to the Seat
C (x1)
D (x1)
J (x6)
O (x6)
Q (x1)
Seat
Armrests
M6x40
M7x15
5mm Hex
Screws
Washers
Key
Align the Armrests (D) to the Seat (C) at the desired width. Screw in the Armrests using 6x M6x40 Screws (J) and
6x M7x15 Washers (O) as seen below. Tighten with the 5mm Hex Key (Q).
P a g e | 5
Advertisement
