PROGRESSIVE DESK FLT-01 User Manual page 8

Assembly
STEP 2: Install the Leg to the Bracket
Insert the Leg (A2) into the Bracket and align the holes. Secure with 4x M6x10 Machine Screws (B2) using Allen Wrench
(B4).
STEP 3: Secure and connect the Remote and Control Box
Place the Remote (A4) and Control Box (A5) at the desired location and mark all four holes' locations.
Use a power drill with a 5/32" drill bit to drill a hole 0.5" deep at each location.
Use 4x S5x16 Wood Screws (B1) to secure the Remote (A4) and Control Box (A5).
B1
A5
B1
A2
B2
A4
P a g e | 8