Ⅰ.introduction - Danfoss Holip HLP-C+ Series Instructions Manual

Table of Contents

Advertisement

I.Introduction
Thank you for purchasing and using the general-purpose inverter
+
of HLP- C
Series of multi-functions and high performance.
The inverter of HLP- C
of HLP-A Series keeping the main functions of HLP-A Series
and with additional functions on request of customers as well
as smaller size. So the inverter of HLP- C
compact and more powerful functions.
Please read carefully the operation manual before put the
inverter to use so as to correctly install and operate the inverter,
give full play to its functions and ensure the safety. Please keep
the operation manual handy for future reference, maintenance,
inspection and repair.
Due to the inverter of a kind of electrical and electronic product
it must be installed, tested and adjusted with parameters by
specialized engineering persons of motor. The marks of
and other simbols in the manual remind you of the
Caution
safety and prevention caustions during the transportation,
installation, r unning and inspection. Please follow these
instructions to make sure the safe use of the inverter. In case of
any doubt please contact our local agent for consultation. Our
professional persons are willing and ready to serve you.
The manual is subject to change without notice.
Danger indicates wrong use may kill or injure people.
Caution indicates wrong use may damage the inverter
● Be sure to turn off the input power supply before wiring.
● Do not touch any internal ecectrical circuit or component
when the charging lamp is still on after the AC power supply
is disconnected, which means the inverter still has high
voltage inside and it is very dangerous.
+
Series has been developed on basis
or mechanical system.
Danger
-  -
+
HLP-C
Inverters
+
Series features more
Danger

Advertisement

Table of Contents
loading

Table of Contents