Table of Contents
Advertisement
● Do not touch the heat sink, braking resistor, or other heat
elements. These can become very hot.
● Be sure that the motor and machine is within the applicable
speed ranges before starting operation because the inverter
is quite easy to run from lower speed to higher speed.
● Do not check the signals on circuit boards while the inverter
is running to avoid danger.
● Be careful when changing the inverter settings. The inverter
has been adjusted and set before ex-work. Do not adjust it
wantonly. Please make proper adjustments according to the
required functions.
● Do consider the vibration, noise and the speed limit of the
motor bearings and the mechanical devices when the inverter
is running at or above the frequency of 50Hz.
Caution
- -
+
HLP-C
Inverters
Advertisement
Table of Contents
