Related Manuals for Energizer EZ20VSJIN-A
Summary of Contents for Energizer EZ20VSJIN-A
- Page 1 ORIGINAL INSTRUCTIONS >EN CORDLESS PRUNING MACHINE EZ20VSJIN-A USER GUIDE CAUTION: Read this manual before using this machine!
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS ..................... 5 KNOW YOUR PRODUCT ....................11 ASSEMBLY ......................... 12 OPERATION ........................13 CLEANING AND MAINTENANCE ..................16 DISPOSAL ........................... 18 DECLARATION OF CONFORMITY ..................19 WARRANTY ........................20 PRODUCT FAILURE ......................21 WARRANTY EXCLUSIONS ....................22... -
Page 5: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 6 left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
- Page 7 batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 ° C may cause explosion. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
- Page 8 Do not attempt to fell a tree until you have an understanding of the risks and how to avoid them. Serious injury could occur to the operator or bystanders while felling a tree. Use of the chain saw for operations different This chain saw is not intended for tree felling.
- Page 9 2) Recharge the batteries indoors only because the battery charger is designed for indoor use only. Risk of electric shock. 3) To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger. 4) Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and this is risk of explosion.
- Page 10 1.7 RESIDUAL RISK Even if properly operating and handling this product in accordance with all the safety requirements, potential risks of injury and damage remain. Due to its construction and build, this tool may present the following hazards: 1) Electric shock from insufficient insulation. Do not use the product when the product or your hands are damp or wet.
-
Page 11: Know Your Product
2. KNOW YOUR PRODUCT 2.1 DESCRIPTION Guide chain Guide bar Chain buffle Knob for chian tightness Softgrip holding position Compression knob Motor housing Self-locking safety switch Power switch Softgrip handle 2.2 TECHNICAL DATA Rated voltage 20V d.c. Cutting capacity 127mm Chain speed 4.8m/s Guide bar... -
Page 12: Assembly
INFORMATION - The declared vibration total value(s) and the declared noise emission value(s) have been measured in accordance with a standard test method and may be used for comparing one tool with another; − that the declared vibration total value(s) and the declared noise emission value(s) may also be used in a preliminary assessment of exposure. -
Page 13: Operation
4. OPERATION 4.1 INSTALLING/REMOVAL THE BATTERY Note: battery and charger not included in the pack, you can buy Energizer 20V battery platform 2Ah or 4Ah. 1) Slide the battery under the power input interface until hearing a click. 2) To remove the battery, push the unlock button located on the top of the battery. Then slide the battery to remove it. - Page 14 1) To start the tool push and hold the self-locking switch. Then press the power switch to start the operation. 2) To stop the operation, release the trigger and then the self-locking switch. 4.3 PRECAUTIONS FOR CUTTING 1) In some specific cases, the operator may not focus on the work, the operator may trip, fall and cause serious injury.
- Page 15 can roll, causing serious or fatal injuries. ⚫ Turn the main pole over and trim the branches on it ⚫ Do not stand on the log for pruning 4.5 PRECAUTIONS FOR LOGGING 1) Inexperienced personnel are not allowed to approach dangerous logging sites, otherwise serious or fatal personal injury and property damage may result.
-
Page 16: Cleaning And Maintenance
4.7 PRUNING OF BRANCHES 1) Put the chain saw guide on the branch to be pruned. 2) Chain cutting at full speed. 3) Cut the branch with the upper part of the guide plate. 4) Cut the branch with tension: first cut a small opening (1) on the loose side, and cut continuously under the tension. - Page 17 4) When cleaning and maintaining the chain saw, the user may be injured by the sharp blade, which may cause personal injury. Please wear scratch resistant gloves 5) The sharpening and all others maintenance shall be performed by authorized service center. 5.1 CLEANING OF CHAIN SAW 1) Turn off the chain saw.
-
Page 18: Disposal
The file should only grind the saw blade forward in one direction, and do not make the file contact the saw blade when pulling back. First, grind the shortest saw blade, and the length of the saw blade is the reference dimension of other saw blades on the chain 1) The round file must match the pitch of the chain 2) Round file head from inside out... -
Page 19: Declaration Of Conformity
7. DELARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, Declares that, Product: Cordless PRUNING MACHINE Model: EZ20VSIJ-A Serial number: 20221106040-20221106339 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. -
Page 20: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 21: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 22: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 23 NOTES...