Table of Contents
Advertisement
4.7 PRUNING OF BRANCHES
1) Put the chain saw guide on the branch to be pruned.
2) Chain cutting at full speed.
3) Cut the branch with the upper part of the guide plate.
4) Cut the branch with tension: first cut a small opening (1) on the loose side, and cut continuously under the
tension.
5. CLEANING AND MAINTENANCE
1) In the state of cleaning, maintenance or repair, if the battery pack is not disconnected from the tool, the
chain saw may start suddenly, resulting in serious personal injury and property loss.
a.
Cut off the power.
b.
Remove the working head of the chain saw.
c.
Remove guide plate and chain.
2) Corrosive cleaning agents, high-pressure cleaning equipment or sharp cleaning tools may damage chain
saws, guides, chains, battery packs and chargers. If the chain saw, guide plate, chain, battery pack and
charger cannot be cleaned in the correct way, the relevant parts may no longer function as they should, or
the safety device may no longer function, which can cause serious injury.
a.
Clean the chain saw, guide plate, chain, battery pack and charger according to the instructions.
3) If the chain saw, guide plate, chain, battery pack and charger cannot be cleaned and maintained in the
correct way, the relevant parts may no longer function as they should, or the safety device may no longer
function, which will lead to serious injury.
a.
Don't try to repair chain saws, battery packs, chargers
b.
If the chain saw, battery pack and charger need maintenance, please contact the dealer in time.
c.
Maintain the guide plate and chain as described in the manual.
16
Advertisement
Table of Contents
