Table of Contents
Advertisement
4) When cleaning and maintaining the chain saw, the user may be injured by the sharp blade, which may
cause personal injury.
a.
Please wear scratch resistant gloves
5) The sharpening and all others maintenance shall be performed by authorized service center.
5.1 CLEANING OF CHAIN SAW
1) Turn off the chain saw. Cut off the power.
2) Wipe the body of the chain saw with a wet cloth.
3) Remove the sprocket guard.
4) Clean the rim of the sprocket and the body with a wet cloth.
5) Use a soft brush when cleaning the battery pack charger.
6) Install the sprocket cover.
5.2 CLEAN THE GUIDES AND CHAINS
1) Turn off the chain saw. Cut off the power.
2) Remove the guide plate and chain.
3) Use a soft brush to clean the rear slot of the guide plate.
4) Use a soft brush to clean the chain.
5) Install the guide and chain.
5.3. MAINTENANCE OF CHAIN WHEEL
1) The user is not allowed to remove the sprocket by himself.
2) If the sprocket is damaged or defective: please do not use the device, contact the dealer in time to
replace it.
3) Maintenance guide plate: if there is burr on the edge of guide plate groove, please polish it in time.
5.4 GRINDING CHAIN
CAUTION: sharpening of the saw chain performed by authorized service center.
The chain should be polished with special round file instead of ordinary round file.
17
Advertisement
Table of Contents
