Related Manuals for Energizer ECO MOTION
Summary of Contents for Energizer ECO MOTION
- Page 1 ORIGINAL INSTRUCTIONS >EN CORDLESS MULTI-FUNCTION BASE ECO MOTION USER GUIDE CAUTION: Read this manual before using this machine!
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................5 2. YOUR PRODUCT..........................12 3. INTENDED USE...........................13 4. OPERATION............................14 5. CLEANING, MAINTENANCE AND STORAGE................15 6. TECHNICAL SPECIFICATIONS....................... 15 7. DISPOSAL............................17 8. EC DELARATION OF CONFORMITY……………………………………………………………..18 9. WARRANTY............................19 10. PRODUCT FAILURE........................20 WARRANTY EXCLUSIONS......................21... -
Page 5: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 6 h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a) Do not force the power tool.
- Page 7 1.2 RESIDUAL RISKS Even if properly operating and handling this tool, some residual risks will remain. Due to its construction and build, this electric tool may present the following hazards: Lung damage, if suitable respiratory protection is not worn. Cuts.
- Page 8 e) Do not open the charger. f) Do not probe the charger. g)The charger is intended for indoor use only. h)This charger can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand...
- Page 9 1.5 SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS a) Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. b) Use clamps or another practical way to secure and support the workpiece to a stable platform.
- Page 10 SPECIAL SAFETY INFORMATION DURING SANDING AND SCRAPING a) Only use the power tool for dry sanding. Do not scrape moist materials. Penetration of water into the power tool increases the risk of electric shock. b) Avoid overheating the sanded object and the sander itself. Possible fire hazard. c) The workpiece gets hot during grinding.
- Page 11 chain saw for cutting metal, plastic, masonry or non-wood building materials. Use of the chain saw for operations different than intended could result in a hazardous situation. k) This chain saw is not intended for tree felling. Use of the chain saw for operations different than intended could result in serious injury to the operator or bystanders.
-
Page 12: Your Product
1.12 SYMBOLS Conforms to relevant safety standards. To reduce the risk of injury, the user must read and understand this manual before using this product. Do not dispose of old appliances with domestic rubbish. Class II, double isolation (only for charger). Do not expose the charger or the battery to water. -
Page 13: Intended Use
2.2 DIFFERENT FUNCTION HEADS NOTE: All heads are not included and sold separately. 12) Reciprocating saw head (ECO3) 16) Jig saw head (ECO4) 13) Drill head (ECO0) 17) Sander head (ECO5) 14) Multi-tool head (ECO7) 18) Multi- tool head (ECO7) 15) Sander head (ECO5) 19) Chain saw head (ECO8) 3. -
Page 14: Operation
4. OPERATION Follow the instructions of the instruction manual of the corresponding head to use the tool safely. 4.1 CHARGING THE BATTERY PACK IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to charge them, thoroughly read all of the safety instructions. 1) Assure that the charger you are using matches your battery pack. -
Page 15: Cleaning, Maintenance And Storage
5. CLEANING, MAINTENANCE AND STORAGE NOTE: Repair and servicing work not described in this manual should always be carried out by our Service Centre. Use only original parts. Switch off the device and remove the battery from the device before working with or transporting it. NOTE: The following cleaning and servicing should be done regularly. - Page 16 No load speed: 0-350/0-1400min Impact drill function (ECO2) Ø13mm double-sleeve Sound pressure level (L ) ..74,9dB(A),K=5 dB(A) Sound power level (L ) ... 85,9dB(A),K=5 dB(A) Impact drill function (ECO2) Vibration (ah): …………………..0,983 m/s , K=1,5 m/s No load speed: 0-3000/min Stroke length: 15mm Reciprocating saw function Sound pressure level (LpA) ..
-
Page 17: Disposal
values depending on the ways in which the tool is used especially what kind of workpiece is processed; There is a need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). -
Page 18: Ec Delaration Of Conformity
32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, PRODUCT: CORDLESS MULTI-FUNCTION BASE MODEL: ECO MOTION Serial number: 20220806463-20220806662 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration. -
Page 19: Warranty
9. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 20: Product Failure
10. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 21: Warranty Exclusions
11. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 22 NOTES...
- Page 23 NOTES...