Table of Contents
Advertisement
3.2 HOW TO ADJUST THE TIGHTNESS THE CHAIN
The chain is loose
Adjust the tightness of the chain
Ready to use
3.3 CHAIN OIL CAN LUBRICATE AND COOL THE CHAIN
1) Turn off the chain saw and remove the battery pack.
2) Place the chain saw flat on a flat surface with the sprocket cover facing up.
3) Use a soft brush or resin solvent to clean the guide plate and saw chain.
4) Apply multifunctional lubricant to the area (1) between the guide plate and the saw chain.
4. OPERATION
4.1 INSTALLING/REMOVAL THE BATTERY
Note: battery and charger not included in the pack, you can buy Energizer 20V battery platform 2Ah or 4Ah.
1) Slide the battery under the power input interface until hearing a click.
2) To remove the battery, push the unlock button located on the top of the battery. Then slide the battery to
remove it.
4.2 STARTING AND STOPPING
13
Advertisement
Table of Contents
