1. INTENDED USE This multi-function tool is intended for sanding, cutting and scraping on wood, plastic, gypsum and metal. It is designed for domestic use and is not designed for commercial, trade or industrial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance.
Page 6
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
Page 7
packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
Page 8
9) The recommended ambient temperature range for tool and battery storage is from 0º C to 50º C. 10) The recommended ambient temperature range for tool and battery use is from -5º C to 50º C. 11) Remove the battery from the device before storage. 12) Electrolyte leaking from the cells can cause damage to the skin, clothes or any other items exposed to it.
Page 9
2) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 3) To charge the battery, use only the charger supplied. 4) Never charge non-rechargeable batteries. 5) During charging the batteries must be placed in a well ventilated area.
Page 10
2.6 SYMBOLS Conforms to relevant safety standards. To reduce the risk of injury, the user must read and understand this manual before using this product. Wear eye protection. Wear breathing protection. Wear hearing protection. Do not dispose of old appliances with domestic rubbish. Class II, double isolation(only for charger).
4. PACKAGE CONTENT LIST 1) Remove all packaging materials. 2) Remove remaining packaging and packing inserts (if included). 3) Check that the package contents are complete. 4) Check the appliance, the power cord, the power plug of charger and all accessories for transportation damage or not.
6. OPERATION 6.1 CHARGING THE BATTERY PACK IMPORTANT! The battery pack is not fully charged at the factory. Before attempting to charge them, thoroughly read all of the safety instructions. 1) Assure that the charger you use is applicable to the battery pack. 2) Insert the charger into 220-240V~, 50-60Hz outlet.
6.4 LED WORKLIGHT 1) The LED worklight (7) will be on when the multi-function tool is switched on. 2) The LED worklight (7) will be off when the multi-function tool is switched off. 6.5 VARIABLE SPEED CONTROL (FIG. 2) 1) To increase the speed of the multi-function tool, rotate the variable speed dial (5) to a higher number.
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product: Cordless Multi-tool Trade mark: ENERGIZER Model: EZMT20V4A Serial number: 20211244091-20211244590 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
11. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.
12. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
13. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...