I [Maintenance] Functions For Maintaining - Panasonic WJ-HD309 Operating Instructions Manual

I [Maintenance] Functions for Maintaining

Perform the settings for the hard disk drives.
It is possible to check the histories (log) of event occur-
rence, error occurrence and access.
SET UP MENU
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete
Event Log
Error Log
Access Log
G [REC Rate] Check the recording rate and
the image quality for each camera channel.
The recording rate for each recording mode for each cam-
era (as shown below) will be displayed in list form.
SET UP MENU
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete
Event Log
Error Log
Access Log
MANU: Manual recording
SCHE: Schedule recording
PRE EVT: Pre-event recording
POST EVT: Post-event recording
EMR: Emergency recording
G [Disk Info] Check the available hard disk
space
The available hard disk space of the following will be dis-
played: The built-in hard disk (normal recording area, event
recording area and copy area), optional extension unit
(EXT1 - 7), DVD-RAM, CD-R and DVD-R disk drive connect-
ed to the copy port (COPY1 or COPY2).
Refer to page 25 for more details on the built-in hard disk.
It is also possible to perform the settings for the hour-meter
(the active time of the HDD) warning and for the HDD safety
mode with this menu.
SETUP MENU
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
94
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
MANU SCHE PRE EVT POST EVT EMR
CAM 1 AUTO 1ips 1ips 1ips 1ips
CAM 2 AUTO 1ips 1ips 1ips 1ips
CAM 3 AUTO 1ips 1ips 1ips 1ips
CAM 4 AUTO 1ips 1ips 1ips 1ips
CAM 5 AUTO 1ips 1ips 1ips 1ips
CAM 6 AUTO 1ips 1ips 1ips 1ips
CAM 7 AUTO 1ips 1ips 1ips 1ips
CAM 8 AUTO 1ips 1ips 1ips 1ips
CAM 9 AUTO 1ips 1ips 1ips 1ips
CAM 10 AUTO 1ips 1ips 1ips 1ips
CAM 11 AUTO 1ips 1ips 1ips 1ips
CAM 12 AUTO 1ips 1ips 1ips 1ips
SUPER FINE
CAM 13 AUTO 1ips 1ips 1ips 1ips
FINE
CAM 14 AUTO 1ips 1ips 1ips 1ips
NORMAL
CAM 15 AUTO 1ips 1ips 1ips 1ips
EXTENDED
CAM 16 AUTO 1ips 1ips 1ips 1ips
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
MANU SCHE PRE EVT POST EVT EMR
CAM 1 AUTO 1ips 1ips 1ips 1ips
CAM 2 AUTO 1ips 1ips 1ips 1ips
CAM 3 AUTO 1ips 1ips 1ips 1ips
CAM 4 AUTO 1ips 1ips 1ips 1ips
CAM 5 AUTO 1ips 1ips 1ips 1ips
CAM 6 AUTO 1ips 1ips 1ips 1ips
CAM 7 AUTO 1ips 1ips 1ips 1ips
CAM 8 AUTO 1ips 1ips 1ips 1ips
CAM 9 AUTO 1ips 1ips 1ips 1ips
CAM 10 AUTO 1ips 1ips 1ips 1ips
CAM 11 AUTO 1ips 1ips 1ips 1ips
CAM 12 AUTO 1ips 1ips 1ips 1ips
SUPER FINE
CAM 13 AUTO 1ips 1ips 1ips 1ips
FINE
CAM 14 AUTO 1ips 1ips 1ips 1ips
NORMAL
CAM 15 AUTO 1ips 1ips 1ips 1ips
EXTENDED
CAM 16 AUTO 1ips 1ips 1ips 1ips
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
1 2 3 4
Remaining
160GB 160GB
MAIN
Normal REC Area
1800GB
15000h 15000h
Event REC Area
160GB 160GB 160GB 160GB 1200GB
EXT1
15000h 15000h 15000h 15000h
Copy Area 1000GB
160GB 160GB 160GB 160GB
EXT2
COPY 1 (Rear) 1000GB
15000h 15000h 15000h 15000h
160GB 160GB 160GB 160GB COPY 2 (Front) 1000GB
EXT3
15000h 15000h 15000h 15000h
160GB 160GB 160GB 160GB
EXT4
15000h 15000h 15000h 15000h
160GB 160GB 160GB 160GB
EXT5
15000h 15000h 15000h 15000h
160GB 160GB 160GB 160GB
EXT6
15000h 15000h 15000h 15000h
160GB 160GB 160GB 160GB
EXT7
15000h 15000h 15000h 15000h
I
Warning for Disk Life Time 3000h
I
HDD Safety Mode
OFF
Notes:
• The displayed available disk space on this menu
will not include the space required for data man-
agement. Therefore, the understated available disk
space will be displayed.
• When CONTINUE is selected for "Disk End Mode" of
"Maintenance", available disk space will be dis-
played as "--".
• "**" will be displayed to refer to a disk that is not
connected or a non-existent area on the disk.
8 Warning for Disk Life Time (hour meter warning
setting)
Select the duration as the maximum active time of the hard
disk from the following. A warning will be displayed when
the set time have passed. Hard disk drives will need to be
replaced after around 20 000 - 30 000 hours of operation in
case they are used at temperature of 25 °C (77 °F). (Refer to
page 5.)
10 000 h/20 000 h/30 000 h
8 HDD Safety Mode
When maintaining (HDD replacement, installation, etc.)
without turning the power of the unit off, select ON for "HDD
Safety Mode". The unit will be restarted in the HDD Safety
Mode. Refer to page 68 for further information.
(The default setting is ON.)
G [Version Info] Check the version information
Version information of the software and the hardware, and
the MAC address will be displayed.
SETUP MENU
Maintenance Recording
Switcher Display
REC Rate I
Software
I
Hardware (M)
Disk Info
(V)
Version Info
I
Mac Address
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Event Schedule
LIVE
Comm System
V1.00
V1.00
V1.00
AA-BB-CC-DD-EE-FF