Copying (Duplicate) - Panasonic WJ-HD309 Operating Instructions Manual

COPYING (Duplicate)

It is possible to copy (duplicate) manually the images
recorded on the disk area selected with the DISK SELECT
window (page 25) to the HDD copy area or the external
recording device (DVD-RAM disk, DVD-R disk, CD-R disk)
connected to the unit.
It is recommended to make back-up copies on a regular
basis for unexpected situations such as malfunction of the
hard disk.
Manual copy is available during the following.
• While displaying live images
• While pausing playback of recorded images
• When displaying a search window (Recording event list
window, VMD search list window, Marking list window)
(Manual copy is not available when a thumbnail window
is displayed.)
Notes:
• The auto copy function is available for copying record-
ed images to the DVD-RAM disk automatically. When
the auto copy function is enabled, manual copy is not
available. Refer to a system administrator for further
information about the auto copy function.
• To copy during playback of recorded images, pause
the playback temporarily.
• To copy recorded images on the DVD-RAM disk, for-
matting (initializing) the DVD-RAM disk is required in
advance. Refer to page 52 for the descriptions of how
to format DVD-RAM disks.
• Copy time may differ depending on the size of the
recorded image. It may take longer to copy images
recorded in higher quality and resolution even when
selecting the same number of cameras and designating
the same recording duration.
[WJ-HD316]
MONITOR1
MONITOR2
R 1 2 3
R
SHIFT SEQ OSD
5 6 7
DISK SELECT COPY TEXT MARK
9 10/0 11
EL-ZOOM LOGOUT
13 14 15
2
z x
[WJ-HD309]
MONITOR1
MONITOR2
R 1 2 3
R
SHIFT SEQ TEXT OSD
4 5 6
DISK SELECT COPY MARK
7 8 9
EL-ZOOM LOGOUT
0
2
z x
48
STOP PLAY PAUSE REC - REC STOP
REV
4
PAN/ GOTO
TILT LAST
SEARCH
SETUP
PAN/TILT
8
/ESC
ZOOM/ A-B SLOW
–
FOCUS REPEAT
12
IRIS LISTED
PRESET
/AUTO
16
SET
BUSY
c
STOP PLAY PAUSE REC - REC STOP
REV
PAN/ GOTO
TILT LAST SEARCH
SETUP
PAN/TILT
SLOW /ESC
ZOOM/ A-B
–
FOCUS REPEAT
IRIS LISTED
PRESET
/AUTO
SET
BUSY
c
z
Press the SHIFT button.
The SHIFT indicator will light.
To copy recorded images during playback, pause the play-
back temporarily.
x
Press the COPY button.
The DATA COPY window will be displayed on monitor 2
and the VGA monitor.
The DATA COPY window will not be displayed when a
thumbnail window is displayed.
In this case, display a list window using the arrows button
(C D).
Notes:
• When the auto copy function is enabled, the DATA
COPY window will not be displayed.
• The copy cancel window will be displayed if the user
who started manual copy presses the COPY button dur-
ing the manual copy. (It is impossible to stop manual
copy performed by other users.)
c
Perform the settings for data copy (camera
channel, time range, the disk on which images
are to be copied). Move the cursor to each set-
ting item using the arrows button and select a
FWD
parameter by rotating the jog dial.
+
Note: Time range to be set for "PERIOD" should be 30 min-
utes or less to copy images for one attempt.
c
FWD
+
c
DATA COPY
CAMERA
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
PERIOD
. . :
1 JAN 03 12 00
1 . JAN . 03 12 : 05
COPY DRIVE
HDD COPY AREA COPY 1 COPY 2
OK CANCEL
AM
AM