I [Recording] - Panasonic WJ-HD309 Operating Instructions Manual

I [Recording]

Perform the settings for the basic recording (REC Setup)
and the emergency recording.
SETUP MENU
REC Setup
Emergency REC
G [REC Setup] Perform the settings for the
basic recording.
Perform the following settings for the basic recording.
SETUP MENU
REC Setup
Emergency REC
8 Recording
Select ON or OFF to record or not record.
ON: Recording will be performed.
OFF: No recording will be performed.
Important:
When OFF is selected for this setting, no recording will
be performed. Select ON for normal use except when it
is necessary to stop recording forcibly such as when a
problem has occurred with the unit.
8 Power ON Manual REC
Select ON or OFF to determine whether or not to start
recording when the power is turned on by the connected
external timer (or the switch).
ON: Manual recording will start automatically after complet-
ing the system check.
OFF: Manual recording will not start automatically after
completing the system check.
Important:
When ON is selected, manual recording will start auto-
matically after completing the system check.
8 Manual Recording Channel
Select a camera channel for manual recording from the fol-
lowing. Refer to page 19 for manual recording.
MON2: Images from the camera channel currently dis-
played on monitor 2 will be recorded.
ALL: Images from all the camera channels will be record-
ed.
98
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
I
O N
Recording
I
Power ON Manual REC OF F
I
All
Manual Recording Channel
I
Embedded REC(Title) ON
I
Embedded REC(Time&Date) ON
I
REC Priority
PRIORITY REC MODE
1 Manual REC
2 Event REC
3
Schedule REC
I
Audio Allocation
AUDIO CAMERA
Audio1 CAM1
Audio2 CAM2
Audio3 CAM3
Audio4 CAM4
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
I
Recording O N
I
Power ON Manual REC OF F
I
Manual Recording Channel All
I
Embedded REC(Title) ON
I
Embedded REC(Time&Date) ON
I
REC Priority
PRIORITY REC MODE
1 Manual REC
2 Event REC
3
Schedule REC
I
Audio Allocation
AUDIO CAMERA
Audio1 CAM1
Audio2 CAM2
Audio3 CAM3
Audio4 CAM4
Important:
When operating on monitor 1 when "MON2" is selected
for "Manual Recording Channel" on the "REC Setup"
menu, all camera channels will be recorded by manual
recording instead of recording the camera channel dis-
played on monitor 2.
When "MON2" is selected, images from a camera chan-
nel for another manual recording that has started later
will be recorded regardless of the operation using the
buttons on the front panel or via a network.
8 Embedded REC (Title)
Select ON or OFF to determine whether or not to record a
displayed camera title together as a part of the recorded
image.
ON: Record camera titles together as a part of the record-
ed image.
OFF: Does not record camera titles.
8 Embedded REC (Time & Date)
Select ON or OFF to determine whether or not to record the
displayed time and date together.
ON: Record the time and date together as a part of the
recorded image.
OFF: Does not record the time and date.
Important:
• It is possible to select ON or OFF to determine whether
or not to display the camera title during playback even
though OFF is selected. (Refer to pages 114, 115.)
• When ON is selected, it is impossible to hide the cam-
era title and the time and date. (Refer to pages 114,
115.)
8 REC Priority
Assigns priorities to recording modes. Assigns priorities 1
(highest) - 3 (lowest) to each recording mode. When two or
more recordings are performed in the same period, only a
recording with the highest priority will be performed.
Refer to page 19 for further information about each record-
ing mode.
Important:
The priority of event recording will be applied for the
priority of pre-/post-event recording. When pre-/post-
event recording is to be performed, it is impossible to
perform manual recording/schedule recording.
8 Audio Allocation
Allocates audio from the audio input connectors (1 - 4) on
the rear panel of the unit to camera channels.
Allocate audio in accordance with the channels of the con-
nected cameras. When OFF is selected, audio will not be
heard.