Panasonic WJ-HD309 Operating Instructions Manual page 124

9SCREEN1 - 9 (only for the WJ-HD316): Displays images
from camera channels 1 - 9 on a 9-split screen.
9SCREEN10 - 16 (only for the WJ-HD316): Displays
images from camera channels 10 - 16 on a 9-split
screen.
10SCREEN (only for the WJ-HD316): Displays images
from camera channels 1 - 10 on a 10-split screen.
13SCREEN (only for the WJ-HD316): Displays images
from camera channels 1 - 13 on a 13-split screen.
16SCREEN (only for the WJ-HD316): Displays images
from camera channels 1 - 16 on a 16-split screen.
SEQ: Images will be displayed in the sequential display.
8 Camera Partitioning
Select a controllable range for each camera channel from
the following.
View/Operate: Displaying live images and operating the
camera are possible.
View: Displaying live images is possible but cameras can-
not be operated.
--: Both displaying live images and operating the camera
are impossible.
G [User Edit] Correction of the registered user
information
It is possible to edit the registered user information.
Move the cursor to "User Name" and rotate the jog dial to
select the user name.
The registered information will be displayed.
Editing can be performed in the same way as registration.
(Refer to page 123.)
Move the cursor to "EDIT" at the lower right on the menu
and press the SET button to complete editing.
SETUP MENU
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
G [User Delete] Deletion of a registered user
It is possible to delete a registered user.
Move the cursor to "User Name" and rotate the jog dial to
select the user name. Move the cursor to "DELETE" and
press the SET button.
The selected user will be deleted.
SETUP MENU
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
124
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
I
User Name
I
User Password
I
Level LV1
I
Priority 16
I
16 SCREEN
Default Screen
I
Camera Partitioning
CAM1 View/Operate CAM9 View
CAM2 View/Operate CAM10 View
CAM3 View/Operate CAM11 View
CAM4 View/Operate CAM12 --
CAM5 View/Operate CAM13 --
CAM6 View/Operate CAM14 --
CAM7 View/Operate CAM15 --
CAM8 View/Operate CAM16 -- EDIT
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
I
User Name
DELETE
G [Host Regist.] Registration of PC (host)
accessible to this unit
Register host information for the PC that accesses the unit
via a network such as a LAN.
Move the cursor to "SET" at the lower right on the menu and
press the SET button to complete registration.
SETUP MENU
Maintenance Recording
Switcher Display
I
Host IP Address
Basic Setup
I
Level
Time & Date
I
Priority
I
User Regist.
Default Screen
I
Camera Partitioning
User Edit
CAM1 View/Operate
User Delete
CAM2 View/Operate
Host Regist.
CAM3 View/Operate
CAM4 View/Operate
Host Edit
View/Operate
CAM5
Host Delete
CAM6 View/Operate
User Level CAM7 View/Operate
CAM8 View/Operate
Save/Load
8 Host IP Address
Enter the IP address. Move the cursor to "Host IP Address"
and rotate the jog dial to enter the IP address. For this unit,
enter 4 units from the decimal numbers (0-254).
Notes:
• Entering "*" validates all numbers.
• It is impossible to register "0.0.0.0" or "*.*.*.*".
8 Level
Select a user level from the following.
Setting of operable functions for each level is described in
"User Level" (Refer to page 125).
LV1/LV2/LV3
8 Priority
Assign priority (1 (lowest) to 16 (highest)) to hosts.
8 Default Screen
Select a startup display to be displayed after login from the
following.
CAM1 - 16 (for the WJ-HD316)/CAM 1-9 (for the WJ-HD
309): Displays live images from the selected camera
channel on a single screen.
QUAD1 - 4: Displays live images from camera channels 1 -
4 on a 4-split screen.
QUAD5 - 8: Displays live images from camera channels 5 -
8 on a 4-split screen.
QUAD9 (only for the WJ-HD309): Displays an image from
camera channel 9 on the upper left area on a 4-split
screen.
QUAD9 - 12 (only for the WJ-HD316): Displays live
images from camera channels 9 - 12 on a 4-split
screen.
QUAD13 - 16 (only for the WJ-HD316): Displays live
images from camera channels 13 - 16 on a 4-split
screen.
9SCREEN (only for the WJ-HD309): Displays an image
from camera channel 1 - 9 on the upper left area on a
9-split screen.
9SCREEN1 - 9 (only for the WJ-HD316): Displays images
from camera channels 1 - 9 on a 9-split screen.
Event Schedule
LIVE
Comm System
000 . 000 000 000 . .
LV1
1
CAM1
CAM9 View/Operate
CAM10 View/Operate
CAM11 View/Operate
CAM12 View/Operate
View/Operate
CAM13
CAM14 View/Operate
CAM15 View/Operate
CAM16 View/Operate
SET