I [Schedule] Settings For The Recording/Event Action Schedule; Flowchart On How To Create A Schedule - Panasonic WJ-HD309 Operating Instructions Manual

I [Schedule] Settings for the recording/event action schedule

Perform the settings for the recording schedules of record-
ing and event action by designating a day of the week and
time.
A day can be divided into up to 6 time zones, and record-
ing programs and event action programs can be assigned
to each time zone to create a recording schedule.
Up to 4 normal recording programs (REC Program) and up
to 4 event action programs (Event Program) can be creat-
ed. Perform the settings for the REC Program: resolution
and recording rate. Perform the settings for the Event
Program: action mode for each event type and auto copy.
It is possible to create special days apart from the normal
schedule, and a recording program of another day of the
week can be switched to a special day's program automati-
cally.

Flowchart on how to create a schedule

Follow the procedures below to create schedules.
Create REC Program/Event Program.
(aPage 105 and 107)
Create a timetable. (aPage 108)
Assign REC Program/Event Program to a timetable.
(aPage 108)
G [REC Program] Create a recording program
Perform the settings of resolution, and recording rate for
each recording mode, and the recording rate and image
quality of each camera channel. Up to 4 recording pro-
grams can be created.
SETUP MENU
Maintenance Recording
Switcher Display
I
Event Program 1
Time Table
I
Event Program 2
REC Program
I
Event Program 3
I
Event Program
Event Program 4
Special Days
Recording Program 1
SETUP MENU
Maintenance Recording
I
Resolution
I
Recording Table Switcher Display
Manual REC 15 ips Schedule REC
12AM
Time Table
MANUAL SCHEDULE
MON
RATE QUALITY RATE QUALITY
REC Prog
CAM1
AUTO SFA 1ips
TUE
Event Prog CAM2 AUTO SFA 1ips
CAM3
AUTO SFA 1ips
WED
Special Days
CAM4 AUTO SFA 1ips
CAM5 1ips
AUTO SFA
THU
CAM6
AUTO SFA 1ips
CAM7 AUTO SFA 1ips
FRI
CAM8
AUTO SFA 1ips
CAM9 AUTO SFA 1ips
SAT
CAM10 AUTO SFA 1ips
CAM11
AUTO SFA 1ips
SUN
CAM12 AUTO SFA 1ips
CAM13 1ips
AUTO EVERY SFA
CAM14
AUTO SFA 1ips
CAM15 AUTO 1ips
EXT. SFA
CAM16
AUTO SFA 1ips
REC: P1 P2
Event Schedule
LIVE
Comm System
SETUP
SETUP
SETUP
SETUP
Event Shedule
FIELD
LIVE
Comm System
15 ips Event REC 30 ips
6AM 12PM 6PM 12AM
PRE EVENT POST EVENT
RATE QUALITY TIME RATE QUALITY TIME
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 1ips SFA 30s
5s
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
1ips 1ips
SFA SFA 5s SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
1ips
SFA 1ips SFA 5s SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 1ips SFA 30s
5s
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
1ips 1ips
SFA SFA 5s SFA 30s
SFA 1ips SFA 5s 1ips SFA 30s
SFA 1ips SFA 1ips SFA 30s
5s
SFA 1ips SFA 5s 1ips SFA 30s
P3 P4 EVT: P1 P2 P3 P4
O K CANCEL
8 Resolution
Select a resolution for images to be recorded from the fol-
lowing.
FRAME 3D ON: High resolution (720 x 576) with the motion
blur compensation
FRAME 3D OFF: High resolution (720 x 576)
FIELD: Standard resolution (720 x 288)
SIF: Low resolution (360 x 288)
Note: When "FRAME 3D ON" is selected, it is possible to
record a moving object with less blurring.
Important:
• It is recommended to set same value for the resolution
of emergency recording as the resolution of manual
recording and schedule recording.
• In the following cases, recording will not be performed
for around 4 seconds:
• When resolution is switched such as when a different
resolution is set depending on different time zones
• When the SETUP MENU is closed after changing the
settings
8 Recording Rate for Each Recording Mode
Perform the settings of the recording rate for each record-
ing mode (manual recording, schedule recording and event
recording).
Assign the maximum recording rates according to the reso-
lution for each recording mode.
The following are the maximum recording rate for each res-
olution.
Resolution
FRAME 3D ON
FRAME 3D OFF
FIELD
SIF
The following are available for the recording rate for each
resolution.
OFF/1.7 ips/2.5 ips/4.2 ips/5 ips/6.3 ips/8.3 ips/12.5 ips/
25 ips/50 ips/100 ips
Important:
• When "FRAME" is selected for "Resolution", "50 ips" and
"100 ips" are not available. When "FIELD" is selected,
"100 ips" is not available.
• The total of the recording rates for each recording
mode must be less than the maximum recording rate of
each resolution.
Examples: When "FIELD" is selected and set, the total
of the recording rates for each recording mode
must be less than 50 ips.
Manual recording: 12.5 ips
Schedule recording: 12.5 ips
Event recording: 25 ips
Maximum recording rate
25 ips
25 ips
50 ips
100 ips
105