Fax Parameter Table - Panasonic WORKIO DP-2310 Operating Instructions Manual

Customizing Your Machine

Fax Parameter Table

* = Factory default setting
No.
001
002
003
004
005
006 Dialing Method
007 Header Print
008 Header Format
009 RCV'D Time Print
012 Comm. Journal
013 Auto Journal Print
014 File Acceptance Report
192
Parameter Setting
Contrast 1 (Lightest) Setting the home position for the CONTRAST.
----
*4 (Normal)
----
7 (Darkest)
Resolution Standard
*Fine
S-Fine
Original *Text
Text/Photo
Photo
Stamp *Off
On
Memory Off
*On
Pulse
*Tone
*Inside
Outside
No Print
*Logo, ID
No.
From To
*Invalid
Valid
Off
Always
*Inc. only
Invalid
*Valid
*Invalid
Valid
Setting the home position for the RESOLUTION.
Setting the home position for the ORIGINAL.
Setting the home position for the STAMP.
To select the stamp function when document is stored in memory, see
Fax Parameter No. 28.
Setting the home position for the MEMORY.
Selecting the dialing method.
Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No Print : Header is not printed.
Selecting the header format.
Selecting whether the machine prints the received date & time, remote
ID, percentage of reduction and page number on the bottom of each
received document.
Selecting the home position of printout mode for COMM. Journal Off/
Always/Inc. only.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
Selecting whether the machine prints the journal automatically after
every 200 transactions.
Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
memory communication.
Comments