Panasonic WORKIO DP-2310 Operating Instructions Manual page 210
Digital imaging systems
Hide thumbs
Also See for WORKIO DP-2310:
- Service handbook (266 pages) ,
- Operating instructions manual (206 pages) ,
- Service manual (487 pages)
Table of Contents
Advertisement
Troubleshooting
Mode
Communication
No Unit Operation
210
Symptom
No dial tone
1. Check the connection of the telephone line.
2. Check the telephone line.
1. Check the connection of the telephone line.
No auto answer
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
Cannot transmit or
An information code will be shown on the display. Refer to the
receive
information code table to find out the trouble.
No unit operation
To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again.
Possible Cause / Action
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 200th transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
Page
217
217
34
211
14
Advertisement
Table of Contents
