Fax Parameter Table - Panasonic DP-8060 Operating Instructions Manual

(Below table are including G3 Facsimile function parameters.)
No. No.
000 Print Fax Parameter List
001 Contrast (HOME)
002 Resolution (HOME)
003 Original (HOME)
004 Stamp (HOME)
005 Memory (HOME)
006 Dialing Method
007 Header Print
008 Header Format
009 RCV'D Time Print
012 Comm. Journal (HOME)
013 Auto JRNL Print
014 File Accept Report
017 Receive Mode
168
Downloaded From ManualsPrinter.com Manuals
Setting Your Machine

Fax Parameter Table

Parameter Parameter Setting Setting
Stop
Start
1 (Lightest)
——
4 (Normal)
——
7 (Darkest)
STD
Fine
S-Fine
Text
Txt/Pht
Photo
Off
On
Off
On
Tone
Pulse
Inside
Outside
No Print
Logo, ID
From To
Invalid
Valid
Off
Always
Inc Only
Invalid
Valid
Invalid
Valid
Manual
Auto
Prints the Fax Parameter List.
Setting the home position for the CONTRAST.
Setting the home position for the RESOLUTION.
Setting the home position for the ORIGINAL.
Setting the home position for the STAMP.
To select the stamp function when document is stored in memory, see Fax
Parameter No. 028 (Stamp At Memory XMT).
Setting the home position for the MEMORY.
Selecting the dialing method.
Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No Print : Header is not printed.
Selecting the header format.
Selecting whether the machine prints the received date & time, remote ID,
percentage of reduction and page number on the bottom of each received
document.
Selecting the home position of printout mode for COMM. Journal Off/Always/
Inc Only.
Off : Does not print
Always : Always prints
Inc Only : Prints only when communication has failed.
Selecting whether the machine prints the journal automatically after every
200 transactions.
Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will be printed after any memory
communication.
Setting the reception mode to automatic or manual.
Comments Comments