Fax Parameter Table - Panasonic DP-1810F Operating Instructions Manual

Fax Parameter Table

No. Parameter
001 CONTRAST
002 RESOLUTION
003 ORIGINAL
004 STAMP
005 MEMORY
006 DIALLING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER
VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL
PRINT
014 FILE ACCEPTANCE
REPORT
017 RECEIVE MODE
Setting
Setting
Number
1 Lightest Setting the home position for the CONTRAST.
2 Lighter
3 Normal
4 Darker
5 Darkest
1 Standard Setting the home position for the RESOLUTION.
2 Fine
3 S-Fine
1 TEXT Setting the home position for the ORIGINAL.
2 TEXT/
PHOTO
3 PHOTO
1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored in
2 On
memory, see Fax Parameter No. 28.
1 Off Setting the home position for the MEMORY.
2 On
1 Pulse Selecting the dialling method.
2 Tone
1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
3 No print
No print : Header is not printed.
1 Logo, ID No. Selecting the header format.
2 From To
1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
2 Valid
on the bottom of each received document.
1 Off Selecting the volume of the Key/Buzzer tone.
2 Soft
3 Loud
1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/Inc. only.
2 Always
Off
3 Inc. only
Always
Inc. only : Prints only when communication has failed.
1 Invalid Selecting whether the machine prints the journal
automatically after every 100 transactions.
2 Valid
1 Invalid Selecting whether the machine prints the file acceptance
journal.
2 Valid
If you set this parameter to valid, a journal will print out
after any memory communication.
1 Manual Setting the reception mode to automatic or manual.
2 Auto
Customizing Your Machine
Comments
: Inside TX copy area.
: Does not print
: Always prints
29