Using Manual Number Dialing - Panasonic WORKIO DP-2310 Operating Instructions Manual

Sub-Addressing

Using Manual Number Dialing

Use
SUB-ADDR
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
1b
2
3
NOTE
72
to separate the Telephone number and the Sub-address.
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
Enter the telephone number, press
(up to 20 digits).
(Up to 36 digits including telephone number, pauses, spaces, FLASH and Sub-
address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as:
5 5 5 1 2 3 4 SUB-ADDR 2 7 6 2 OK
The document is stored into memory and your machine starts to dial the
number of the station and sends the document(s) with Sub-addressing
information.
1. separates the Sub-address from the Telephone number and is indicated by an "s"
FLASH
in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
then enter the Sub-address
SUB-ADDR
Memory Transmit STN(s):001
Add More STN(s)
Press START To Send
AMERICA
AFRICA
APOLLO ASIA
BRAZIL
to select the "FAX/EMAIL" mode.
ANTARTICA
BERLIN