Replacement Parts - Hussmann VRM Installation & Operation Manual

REPLACEMENT PARTS

Main Switch
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3034041_ J
ANSI Z535.6-2011 (R2017)
Page 18
Providing Information About Safety Messages in Collateral Materials and Product
Visual Description of R290 Replacement Parts
A1 Explanation of Signal Words and Symbols
Signal words and safety symbols that are used in a product's collateral materials or on the product may
be defined in collateral materials if space is available.
A1.1 Safety Alert Symbol
The meaning of the safety alert symbol may be provided in collateral materials. The following artwork may
be used for this purpose.
A1.2 Signal Words
Control RTN400
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
may be explained in collateral materials. The following artwork may be used for this purpose.
» Component parts are specifically chosen for propane
exposure and therefore non-incendive and non-sparkling.
Component parts shall be replaced with identical
components, and servicing shall be done by factory
authorized service personnel only, so as to minimize the risk
of possible ignition due to incorrect parts or improper service.
A1.3 Other Highlighting Conventions
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
manipulations, indention, etc.) may be explained in collateral materials.
A1.4 Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
collateral materials.
Annex A
Safety Signs and Labels
(Informative)
Light Switch
This is the safety alert symbol. It is used to alert you
to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
Control Display KDE
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
physical injury.
Safety instructions (or equivalent) signs indicate specific
safety-related instructions or procedures.
4-3
© 2017 National Electrical Manufacturers Association
Solid State Relay 25 Amp