rack attaches to the back of the
cabinet.
DIAL THERMOMETER
The cabinet can be provided with a
two inch dial thermometer rather
than the standard pencil type
thermometer. THIS TYPE MUST
BE FACTORY INSTALLED. It is
located in the left end of the upper
stainless steel reflector above the
light fixture.
LID LOCK KIT
For product security, a lid lock kit
can be provided. Each kit secures
two lids.
WARRANTY, ELECTRICAL COMPONENTS
ORDERING REPLACEMENT
PARTS
Contact your nearest
Hussmann Distributor.
Always specify model and serial
number of cabinet.
If correct part number is not
known, give a clear description
of part itself and it functions in
the cabinet or remote unit.
CASTER KIT
If the cabinet needs to be moved
quite often or for additional health
code regulations, the caster kit
raises the cabinet approximately
4 ½". The wheel on the caster itself
is 3".
NOVELTY BASKET
For the storage and display of
novelty ice cream items, the
novelty basket is ideal. The basket
is white epoxy-coated for that clean
look and it is 10" x 12" x 6 ½" high.
Basket dividers are also available.
WIRING DIAGRAMS
WARRANTY PARTS
PROCEDURE
First three steps same as
ordering replacement parts.
Give original installation date
of cabinet and, if possible,
forward a copy of the original
invoice or delivery receipt.
All shipments of in-warranty
replacement parts will be
invoiced from the factory until
such time as the defective part
is returned and proved to be
defective by our Quality Control
Department.
22