Maintenance; Care And Cleaning; Interior Surfaces; Cleaning Underneath The Case - Hussmann VRM Installation & Operation Manual

Providing Information About Safety Messages in Collateral Materials and Product

CARE AND CLEANING

A1 Explanation of Signal Words and Symbols
Long life and satisfactory performance of any equipment is dependent Signal words and safety symbols that are used in a product's collateral materials or on the product may
be defined in collateral materials if space is available.
upon the care it receives. To ensure long life, proper sanitation and
A1.1 Safety Alert Symbol
minimum maintenance costs, this unit should be thoroughly cleaned,
all debris removed and the interiors washed down. Cleaning often will
The meaning of the safety alert symbol may be provided in collateral materials. The following artwork may
be used for this purpose.
control or eliminate odor buildup. Frequency of cleaning is dependent
on usage and local health requirements.
Exterior Surfaces
The exterior surfaces must be cleaned with a mild detergent and warm
water to protect and maintain their attractive finish.
A1.2 Signal Words
Never use abrasive cleaners or scouring pads. Never use caustic soda,
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
kerosene, gasoline, thinner, solvents, detergents, acids, chemicals or
may be explained in collateral materials. The following artwork may be used for this purpose.
abrasives. Do not use ammonia-based cleaners on acrylic parts.
» To reduce the risk of fire, electrical shock or injury when
cleaning this merchandiser:
» Unplug the merchandiser before cleaning;
» Keep all liquids away from electrical and electronic
components;
» Do not use any mechanical device or other means to
speed the defrost process, except as recommended by the
A1.3 Other Highlighting Conventions
manufacturer.
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
manipulations, indention, etc.) may be explained in collateral materials.
A1.4 Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
collateral materials.
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3034041_ J
Copyright National Electrical Manufacturers Association
Provided by IHS Markit under license with NEMA
No reproduction or networking permitted without license from IHS
Annex A

MAINTENANCE

Safety Signs and Labels
(Informative)
This is the safety alert symbol. It is used to alert you
to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
physical injury.
Safety instructions (or equivalent) signs indicate specific
safety-related instructions or procedures.
© 2017 National Electrical Manufacturers Association
Licensee=Hussmann Corp/8160899001, User=Trevett, Jason
Not for Resale, 02/16/2021 11:49:55 MST

INTERIOR SURFACES

ANSI Z535.6-2011 (R2017)
Page 18
Do not use ammonia-based products to clean light shields. Never use
abrasive cleansers or scouring pads. Providing Information About Safety Messages in Collateral Ma
The interior surfaces may be cleaned with most domestic detergents
and sanitizing solutions with no harm to the surface. Always read
and follow the manufacturer's instructions when using any cleaning
A1 Explanation of Signal Words and Symbols
product.
Signal words and safety symbols that are used in a product's collateral materials
be defined in collateral materials if space is available.
Inspect all LED connections and plug/ receptacles for signs of arcing.
A1.1 Safety Alert Symbol
Replace any component that shows signs of arcing. Make sure all
unused receptacles have close-off covers securely attached.
The meaning of the safety alert symbol may be provided in collateral materials. T
be used for this purpose.

CLEANING UNDERNEATH THE CASE

The case can be moved to facilitate cleaning. Unplug the merchandiser,
and move it out if the way in order to sweep and mop the area
A1.2 Signal Words
underneath the case. Brush away all dirt and litter from the area.
Ensure there is no dirt build up around the bottom of the case or near The meaning of the different signal words as defined by the ANSI Z535.6 and AN
may be explained in collateral materials. The following artwork may be used for
the intake or exhaust.
» Do NOT use HOT water on Cold glass Surfaces. This can
cause the glass to shatter and could result in personal
injury. Allow glass fronts, to warm before applying hot
water.
A1.3 Other Highlighting Conventions
3-1 The meaning of any other highlighting conventions used to differentiate safety m
manipulations, indention, etc.) may be explained in collateral materials.
Annex A
Safety Signs and Labels
(Informative)
This is the safety alert symbol. It is us
to potential physical injury hazards. O
messages that follow this symbol to
injury or death.
DANGER indicates a hazardous situa
avoided, will result in death or se
WARNING indicates a hazardous situ
avoided, could result in death or
CAUTION indicates a hazardous situ
avoided, could result in minor or
NOTICE is used to address practices
physical injury.
Safety instructions (or equivalent) sig
safety-related instructions or proc