Maintenance; Care And Cleaning; Exterior Surfaces; Interior Surfaces - Hussmann microSC MDN4775B1A Manual

Medium temperature self contained open vertical merchandiser
Table of Contents

Advertisement

P/N 9FQ6P11007900_B

CARE AND CLEANING

Long life and satisfactory performance of
any equipment is dependent upon the care it
receives . To ensure long life, proper sanitation
and minimum maintenance costs, these
merchandisers should be thoroughly cleaned,
all debris removed and the interiors washed
down, weekly .

Exterior Surfaces

The exterior surfaces must be cleaned with a
mild detergent and warm water to protect and
maintain their attractive finish . N
abrasive cleaNsers or scouriNg pads

Interior Surfaces

The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners
and sanitizing solutions with no harm to the
surface . Self contained models empty into a
limited capacity drain pan, which will overflow
if excess water is used in cleaning .

Do NOT Use:

• Steel Wool, abrasive cleansers and scouring
pads, as these will mar the finish .
• Coarse paper towels on coated glass .
• Ammonia-based cleaners on acrylic parts .
• Solvent, oil or acidic based cleaners on any
interior surfaces .
• Do not use steam or high pressure water
hoses to wash the interior . These will destroy
the merchandisers' sealing causing leaks and
poor performance .
• Never introduce water on self-contained units
with an evaporator pan .
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

MAINTENANCE

Do:
• Remove the product and all loose debris to
avoid clogging the waste outlet .
• Store product in a refrigerated area such as a
cooler . Remove only as much product as can
be taken to the cooler in a timely manner .
• Disconnect electrical power before cleaning .
• Thoroughly clean all surfaces with soap and
hot water .
ever use
.
• Take care to minimize direct contact between
fan motors and cleaning or rinse water .
• Allow merchandisers to dry before resuming
operation . After cleaning is completed, turn
on power to the merchandiser .
REMOVING SCRATCHES FROM
(OPTIONAL) BUMPER
1 . Use steel wool to smooth out the surface
2 . Clean area .
3 . Apply vinyl or car wax and polish surface
area of the bumper .
for a smooth glossy finish .
Bumper
Open Vertical Merchandisers
3-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microsc mdn4775s1aMicrosc mdn3575b1aMicrosc mdn3575s1a

Table of Contents