Maintenance; Care And Cleaning - Hussmann microSC VRL1B Installation & Operation Manual

P/N 3034040_H
To reduce the risk of fire, electrical shock or
injury when cleaning this merchandiser:
• Unplug the merchandiser before cleaning;
• Keep all liquids away from electrical and
electronic components;
• Do not use any mechanical device or other
means to speed the defrost process, except
as recommended by the manufacturer.

CARE AND CLEANING

Long life and satisfactory performance of
any equipment is dependent upon the care it
receives. To ensure long life, proper sanitation
and minimum maintenance costs, this unit
should be thoroughly cleaned, all debris
removed and the interiors washed down.
Cleaning often will control or eliminate odor
buildup. Frequency of cleaning is dependent
on usage and local health requirements.
Do not use HOT water on COLD glass surfaces.
This can cause the glass to shatter and could
result in personal injury. Allow glass fronts,
ends and service doors to warm before applying
hot water.
Exterior Surfaces
The exterior surfaces must be cleaned with a
mild detergent and warm water to protect and
maintain their attractive finish.
n
ever use AbrAsive cleAners or scouring
. n
pAds ever use cAustic sodA
, ,
gAsoline thinner
,
Acids chemicAls or AbrAsives
-
AmmoniA bAsed cleAners on Acrylic pArts
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

MAINTENANCE

,
kerosene
,
solvents detergents
. d
o not use
Interior Surfaces
d
o not use AmmoniA
cleAn light shields
cleAnsers or scouring pAds
The interior surfaces may be cleaned with most
domestic detergents and sanitizing solutions
with no harm to the surface. Always read and
follow the manufacturer's instructions when
using any cleaning product.
Inspect all LED connections and plug/
receptacles for signs of arcing. Replace any
component that shows signs of arcing. Make
sure all unused receptacles have close-off covers
securely attached.
CLEANING UNDERNEATH THE CASE
The case can be moved to facilitate cleaning.
Unplug the merchandiser, and move it out if
the way in order to sweep and mop the area
underneath the case. Brush away all dirt and
litter from the area. Ensure there is no dirt
build up around the bottom of the case or near
the intake or exhaust.
,
,
.
-
bAsed products to
. n
ever use AbrAsive
.
VRL Merchandisers
27