2
Thumbscrew
1
Cam handle
2
Step 5.
Pull the cam handle downward and begin to slide the controller module out of the chassis. Make
sure that you support the bottom of the controller module as you slide it out of the chassis.
Replacing a PCIe card
To replace a PCIe card, locate it within the controller and follow the specific sequence of steps.
About this task
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-CZwRXsocAOmi5RsaXDVZQG
Step 1.
If you are not already grounded, properly ground yourself.
Step 2.
Loosen the thumbscrew on the controller module side panel.
Step 3.
Swing the side panel off the controller module.
ThinkSystem DM7000x Hardware Installation and Maintenance Guide
56
1