Advertisement
Quick Links
DM7100H Systems
Installation and Setup Instructions
Prepare for installation | Stage 1
1. Unpack all boxes and inventory contents.
Pre-setup
2. Complete the Cluster Configuration Worksheet.
100 GbE cables (QSFP28)
In the box
25 GbE cables (SFP28)
HA interconnect, GbE network cables
You provide
Rack space
4U per DM7100H chassis
+4U for each DM600S shelf
or +2U for each DM240S shelf
or +2U for each DM120S shelf
Prepare for installation
RJ-45 cables
Wrench port (e0M/BMC)
(order-dependent)
32 Gb FC (SFP+ Op)
FC optical network cables
Screwdriver
Additional network cables
For connecting your storage system
to your network switch and
Microsoft® Windows® client
Install hardware
Cable storage
1
2
Storage Cables
mini-SAS HD to
mini-SAS HD cables
16 Gb FC or 25GbE cables
Mezzanine cards (SFPs pre-installed)
Client
Runs the software to configure
your storage system.
Complete system setup
and configuration
3
4
Additional cables
Ethernet cables
Power cables
micro USB console cable
Slide rail kit
Cable management tray
Advertisement
Related Manuals for Lenovo DM7100H
Summary of Contents for Lenovo DM7100H
- Page 1 Rack space Screwdriver Additional network cables Client Runs the software to configure 4U per DM7100H chassis For connecting your storage system +4U for each DM600S shelf to your network switch and your storage system. or +2U for each DM240S shelf Microsoft®...
- Page 2 Install hardware | Stage 2 16Gb FC or 25GbE Rear view of DM7100H System 16Gb FC or 25GbE Install system in a rack • Install the rail kits, as needed, and then install and secure your system CAUTION LIFTING HAZARD using the instructions included with the kit.
- Page 3 Pull-tab proper cable connector pull-tab orientation. Note: To unplug a cable, gently pull the tab to release the locking mechanism. Cabling a DM7100H system to three DM240S shelves mini-SAS HD Connect the shelf-to-shelf ports Connect Controller A to the drive shelves...
- Page 4 Completing setup 1. Go to https://commercial.lenovo.com and login with your corporate account. 2. Choose Monitor from the navigation pane to enter the ThinkSystem Intelligent Monitoring page. 3. Monitor health status of all your systems on the page.