Table of Contents
Advertisement
If your system has...
A network connection
No network connection
Step 12. Your next step depends on your system configuration:
Then...
1. Press
when prompted to restore the
y
backup configuration.
2. Set the healthy controller to advanced
privilege level:
set -privilege advanced
3. Run the restore backup command:
node restore-backup -node local -target-
address impaired_node_IP_address
4. Return the controller to admin level:
-privilege admin
5. Press
when prompted to use the
y
restored configuration.
6. Press
when prompted to reboot the
y
controller.
1. Press
when prompted to restore the
n
backup configuration.
2. Reboot the system when prompted by the
system.
3. Select the Update flash from backup
config (sync flash) option from the
displayed menu.If you are prompted to
continue with the update, press
.
Chapter 4
Hardware replacement procedures
system
set
.
y
71
Advertisement
Table of Contents
