Table of Contents
Advertisement
Attention: Visually inspect the DIMM to verify that it is evenly aligned and fully inserted into the
slot.
Step 8.
Repeat these steps for the remaining DIMMs.
Moving a PCIe card
To move PCIe cards, locate and move them from the old controller into the replacement controller and follow
the specific sequence of steps.
Before you begin
You must have the new controller module ready so that you can move the PCIe directly from the old
controller module to the corresponding slots in the new one.
About this task
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-CZwRXsocAOmi5RsaXDVZQG
Step 1.
Loosen the thumbscrew on the controller module side panel.
Step 2.
Swing the side panel off the controller module.
Side panel
1
PCIe card
2
2
1
.
Chapter 4
Hardware replacement procedures
43
Advertisement
Table of Contents
