Table of Contents
Advertisement
5.3
Configuring DaRouter
The Preset Section (Figure 5.20)
Figure 5.20
The Device Section (Figure 5.21)
Figure 5.21
The Activity Monitor (Figure 5.22)
Figure 5.22
• Active Preset – tells you the currently selected preset.
This is a drop-down box that can be used to select any presets
that are either loaded by default, or have been manually
loaded by the user.
• Reload button – This button reloads the currently selected
preset.
• "?" button – Loads the help file associated with the
currently selected preset. It is always important to click this
button to learn about functionality with the currently loaded
preset.
This section tells you what devices are connected and active.
When an SCS.3 controller is connected, you will see it "light
up" with a blue outline to let you know it is active. Also, you
will see the box underneath each connected device will tell
you its serial number. If you want to change the device order,
you can click the serial number drop-down box and swap
positions with any of the other devices.
The Activity Monitor lets you know what is happening with
DaRouter. There are 3 symbols here, an arrow, a square, and
another arrow. The first arrow lights up blue to let you know
when DaRouter is receiving MIDI data from your controllers.
The square lights up to let you know that DaRouter is
processing rules. The last arrow lets you know when DaRouter
is sending MIDI out to your application.
You are also able to manually load presets into DaRouter. Just
take the preset file you have downloaded and drag & dropping
it on top of the DaRouter application so it is loaded as the
active preset.
Important: if you want to know how the preset you have
selected works, press the "?" button.
31
Configuring DaRouter
Advertisement
Table of Contents
