Table of Contents
Advertisement
3.2.3
EQ/FX Mode Switches
MASTER
MASTER
Figure 3.10
3.2.4
Channel Fader
MASTER
MASTER
Figure 3.11
These buttons will toggle the Slider Section and Button Section
between EQ controls and FX controls. Allows for 4 buttons and 4
sliders per deck. When switching modes the latest values for that
mode will be displayed. (Figure 3.10)
The Channel Fader is always assigned to control each channel's
volume (even when you are in EQ/FX mode). With StanTouch
technology, it is easy to do quick kills or gradual fades using this
touch strip.
Like the other SCS.3m sliders, the Channel Fader lets you know its
value with the LED strip next to it, and it will remember and recall
its value when you switch channels. It is also multi-touch capable.
Do you want to do a transform but don't have a LINE/PHONO
switch? Try holding one finger at the bottom of the fader while
tapping the top of the fader with another. This is easy to pull off with
one hand, and accomplishes the same kind of effect. (Figure 3.11)
11
EQ/FX Mode Switches
Advertisement
Table of Contents
