Connecting The Scs.3/Installing Virtual Dj; Remove The Rear Panels - Stanton SC SYSTEM 3 User Manual

2. Connecting the SCS.3 Controllers
In this section we will briefly describe how to connect the SC System 3.
2.1

Remove the Rear Panels

Open the rear panel of the SCS.3m and two SCS.3d controllers.
On the SCS.3m (Figure 2.1), you will find:
(2) USB type "A" sockets
(1) USB type "B" socket
(1) 8 mm 12 VDC power supply
On the SCS.3d, you will find a USB type "B"
socket. (Figure 2.2)
Connect the SC System 3/Installing Virtual DJ
USB TYPE A
Figure 2.1
Figure 2.2
3
USB TYPE B
8mm 12 VDC
USB TYPE B