Advanced Control Of Built-In Presets; Scs.3D Standalone Configuration - Stanton SC SYSTEM 3 User Manual

Absolute Sliders
Absolute Sliders exactly follow your finger's position on the surface and feature multiple touches.
These are good for controls like volume or effect settings. For instance, the preset with all Absolute
Sliders could be mapped towards controlling a digital audio workstation.
Relative Sliders
Relative Sliders follow the gestures of your finger but do not send absolute position. These are good
for controls that might want to be fine-tuned as opposed to quickly moved from top to bottom.
For instance, a pitch control would be good for relative control.
Note: Not all MIDI applications support relative mode. Please consult the owner's manual of your
software. Sometimes relative is referred to "Relative Bin Offset."
Slider Pattern
This controls the feedback of the slider's LEDs on the control surface. The default pattern is "boost/kill"
feedback for EQ and "bottom to top" (or sweep) feedback for FX and volume sliders. When sliders are
relative, no feedback is given other than "finger trace" which follows your hand movement while
touching the sliders.
6.1.3

Advanced Control of Built-in Presets

The built-in presets can be re-configured and saved through MIDI messages.
To learn more about the SCS.3m's advance MIDI modes please visit www.stantondj.com/SCS3m/MIDI/
for complete MIDI specifications and guides on reprogramming the built-in presets and using
application feedback mode to create your own controls and mappings.
6.2 SCS.3d Standalone Configuration
The SCS.3d requires the DaRouter application to be running to support generic MIDI control.
In DaRouter it is necessary to select the appropriate preset according to the physical configuration.
The generic presets available are listed in section 6.2.1 below.
A single SCS.3d can be used to control two decks, or two SCS.3d's can be used for dual deck control.
The LED feedback for these generic presets is performed by the DaRouter software based on the user
inputs on the StanTouch surface.
Advance Control of Built-in Presets
34