Table of Contents
Advertisement
3.2.1
Deck Switch
MASTER
MASTER
Figure 3.6
Figure 3.7
In some cases, you might also see the Deck Switching buttons used for things like alternative layouts.
It really depends on the mapping and the application. In any situation, the Deck Switch buttons allow
the SCS.3m to effectively double its number of controls while maintaining the same small form factor.
The Deck Switch button allows for each side of the SCS.3m to be
switched between 2 virtual decks. Each side can be toggled
independently, thus allowing 4 channels to be controlled in a
conventional 2-channel design. (Figure 3.6)
In each Deck Switcher, there is a backlit letter (either A and C, or B
and D) to indicate which virtual channel that side of the SCS.3m is
controlling. The SCS.3m will keep current the controls for both decks
and update to the latest values when returning to a deck.
This is done by providing a different set of MIDI controls that can be
used to map to a different channel in a program such as Virtual DJ,
or provide an additional set of controls in other applications. All of
the controls for all "decks" and modes such as EQ, FX and Master
are transmitted on one channel number so the SCS.3m only takes
up one MIDI channel number in your MIDI setup. (Figure 3.7)
9
Deck Switch
Advertisement
Table of Contents
