Table of Contents
Advertisement
6.2.1
Selecting Presets
To use the generic preset for MIDI mapping with the SCS.3d, you need to select the proper preset in
DaRouter. Depending on how you intend to use the SCS.3d with your application, you will need to
select one of the following presets.
Preset Name
GENERIC Single SCS.3d
GENERIC Single SCS.3d Dual Vir-
tual
GENERIC Dual SCS.3d
6.3
SC System 3 Configuration
To use all 3 controllers together as a system for generic MIDI mapping, you will need to run DaRouter
and select the "GEN SC System 3" preset. This will place the SCS.3d's into the GEN Dual SCS.3d preset
and the mixer into Automatic mode as described above.
6.4
MIDI Learn
Now that you have configured the SCS.3m, SCS.3d, or the entire SC System 3 for Generic MIDI Control,
you can use MIDI Learn to assign any of the controls into your software application. Almost all audio
applications support MIDI Learn, but each application implements MIDI Learn in a different way.
To obtain more information about how MIDI Learn works in your favorite application, please read its
User Manual.
This preset is used when only one SCS.3d is required for
performance. Only one deck is enabled so this preset will
not switch between deck A/B. This preset would be used
for non-standard deck mapping such as for video
applications.
The DECK button provides another "vinyl" mode layout
instead of doing deck switching. In this preset, MIDI
messages are sent on channel 8 only.
This preset is used when using one SCS.3d is being used
to control 2 virtual decks. This preset would be used for
most DJ applications.
When using this preset, pressing the DECK button will
switch between decks A and B. When switching decks the
notes and control messages are the same, only the MIDI
channel changes from 8 for deck A and 9 for deck B.
This preset is used when two SCS.3d's are connected, and
each unit needs to be directly mapped to deck A and B
respectively. Because both decks are directly mapped,
there is no need for deck switching, so the DECK button is
disabled. In this preset MIDI messages are sent on channel
8 for deck A and channel 9 for deck B.
35
Selecting Presets
Functionality
Advertisement
Table of Contents
