Table of Contents
Advertisement
RIGHT
Fit the frame body cover assembly (Right) to the
frame body lower cover assembly.
A: Frame body lower cover assembly
B: Frame body cover assembly (Right)
C: Guide
D: Hole
E: Boss
F: Hole (rubber cushion)
G: Hook
Fix the frame body cover assembly (Right) to the
frame body lower cover assembly with fastener.
NOTE:
To install the fastener, pull the center pin and
fix the fastener by pushing the center pin.
A: Fastener
B: Hook
Check the engine coolant and brake fluid level.
If the level is lower than the "LOW" level line, carry out
the SERVICING procedure.
A: Engine coolant reservoir
B: Rear brake master reservoir
C: Upper level line
D: Lower level line
Insert the breather hose to the hole.
Be sure not to bend or twist the hose when
installing.
A: Breather hose
B: Hole (Frame body lower cover)
14
Advertisement
Table of Contents
