Holiday Mode; Operating Lock; Programming Of Heating Schedules; Week Profile - HomeMatic HmIP-WTH-1 Installation And Operating Manual

Operating modes and configuration
6.4

Holiday mode

The holiday mode can be used if you want to maintain a fixed tempera-
ture for a certain period (e.g. during your holidays or a party).
6.5

Operating lock

Operation of the device can be locked to avoid settings being changed
unintended (e.g. through involuntary touch).
6.6

Programming of heating schedules

You can use this menu item for configuring heating and cooling profiles
and to adjust the week profiles according to your personal needs.
If the selected schedule is a heating schedule, the room is heated as
soon as the temperature falls below the defined value. If the select-
ed profile is a cooling profile, the room is cooled as soon as the
temperature increases the defined value.
6.6.1

Week profile

In the week schedule, for each weekday up to 6 heating schedules(13
change settings) can be set separately. The programming is carried out
for the selected days, whereby temperature settings have to be set for the
entire period between 00:00 and 23:59h.
6.6.2

Optimum start/stop function

To reach the desired temperature in the room at the defined time you can
activate the optimum start/stop function.
6.7

Date and time

You can set the year, month, day and time.
6.8

Offset temperature

As the temperature is measured on the wall thermostat, the temperature
distribution can vary throughout a room. To adjust for this, a temperature
offset of ±3.5 °C can be set. If, for example, 18 °C is measured instead of
the 20 °C set, an offset of -2.0 °C must be set. An offset temperature of
0.0 °C is set in the factory settings.
40