Trade-wind I32302 Installation Instructions & Use & Care Manual

I3200 30" Series
Model
Width(in.)
I32302 28
I32303 28
CONTENTS:
Part 1 - Planning the Installation
Part 2 - Electrical Connection
Part 3 - Direction of Vent and
Securing The Hood
Part 4 - Use & Care
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Installer: Please leave Installation Instructions with the range hood owner.
Please keep Installation Instructions for local electrical inspector's use and for future reference.
Owner:
WARNINGS: Instructions must be followed carefully to avoid personal injury.
IMPORTANT: Must be followed carefully to avoid damage or incorrect installation.
TIPS: Contain helpful information to facilitate installation.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
b) Before servicing or cleaning unit, switch power off at service panel and lock service panel and/or the service
disconnection means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag to the service panel.
CAUTION
-- For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
Revised 6/11/18
CFM
3
"
/ 290
8
3
"
/ 390
8
READ AND SAVE THESE INSTRUCTIONS
Copyright © 2018 Trade-Wind Manufacturing, LLC
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
®
Trade-Wind I3200 30" Series Range
Hoods
Proverbs 22:29 Page 1