Subscribe to Our Youtube Channel
Related Manuals for Trade-wind H3200 Series
Summary of Contents for Trade-wind H3200 Series
- Page 1 ***ATTENTION*** PLEASE REMOVE THE RIGHT SIDE BAFFLE FILTER TO LOCATE YOUR NEW REMOTE CONTROL. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 1...
- Page 2 Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 2...
- Page 3 CAUTION -- For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 3...
- Page 4 When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. d) Ducted fans must always be vented to the outdoors. WARNING -- TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 4...
-
Page 5: Planning The Installation
Model Width Models Width Opening Opening Opening 48‖ 10‖ 30‖ 8‖ 30‖ 7‖ H32487RC H32306RC H32303RC 36‖ 8‖ 36‖ 7‖ H32366RC H32363RC 42‖ 8‖ 42‖ 7‖ H32426RC H32423RC Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 5... -
Page 6: Electrical Connection
MOUNTING HOLES: Because the Trade-Wind H3200 Series range hood was designed for all applications, no mounting holes have been pre-drilled. This allows the hood (or liner) to be attached in the areas of the cabinet or wood hood canopy that have proper wood frame support. The hood should be attached to the wood framing through the top, side, or back. - Page 7 MR16/GU10 LED flood light bulbs. They can be purchased at most home or grocery stores. The bulbs provided with the unit are 3.5 watt, 350 lumen, and 3000K (color temperature). Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 7...
-
Page 8: Range Of Remote Control
The infrared transmitter at the top of the remote must be pointed in the direction of the electronic control at the right front of your hood or liner. Range distance will vary depending on your installation, but see diagram below for approximate range area. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 8... -
Page 9: Warranty
What is NOT Covered: Normal maintenance and service of any product that has been subject to misuse, negligence, ® accident, or installation inconsistent with the recommended Trade-Wind Installation Instructions ® and Trade-Wind Best Practices Guidelines. -
Page 10: Best Practices
7” round duct to a 3.25” x 10” rectangular duct. If space allows, it is best to use a 3.25” x 14” rectangular duct with a 3.25” x 14” x 7” transition. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 10... - Page 11 (the ceiling) will reduce the amount of cold air traveling down the duct into the heated space and into the kitchen through the ventilator. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 11...
- Page 12 The “radius” is one-half the diameter of a round duct, e.g., ½ of a 10” round duct is 5”. 3.1416 is “Pi”, the “constant” used when calculating the area of a circle. Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 12...
Need help?
Do you have a question about the H3200 Series and is the answer not in the manual?
Questions and answers