Download Print this page
Trade-wind P7200 Series Installation Instructions & Use & Care Manual

Trade-wind P7200 Series Installation Instructions & Use & Care Manual

Bbq hood
Hide thumbs Also See for P7200 Series:

Advertisement

Quick Links

P7200 Series Models:
P7200 Series Models:
No Blower
P7236
P7242
P7248
P7260
P7272
CONTENTS:
Part 1 - Planning The Installation
Part 2 - Electrical Connection
Part 3 - Direction of Vent and Securing The Hood
Direction of Vent and Securing The Hood
Part 4 - Use & Care
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Please be advised that the Trade-Wind
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
should be installed with a MINIMUM of three (3) f
should be installed with a MINIMUM of three (3) feet of weather proof roof coverage on all sides that are not
protected from direct rain by an adjacent wall.
protected from direct rain by an adjacent wall.
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
to prevent ingress of water.
Installer:
Please leave Installation Instructions with the BBQ hood owner.
Please leave Installation Instructions with the BBQ hood owner.
Owner:
Please keep Installation Instructions for local electrical inspector's use and for future reference.
Please keep Installation Instructions for local electrical inspector's use and for future reference.
Please keep Installation Instructions for local electrical inspector's use and for future reference.
WARNINGS: Must be followed carefully to avoid
IMPORTANT: Must be followed carefully to avoid damage or incorrect installation.
TIPS: Contain helpful information to facilitate installation.
Contain helpful information to facilitate installation.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
Revised 5-21-20
1200 CFM
0 CFM
P7236-
-12
P7242-
-12
P7248-
-12
P7260-
-23
P7272-
-23
®
®
P7200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area
200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area
eet of weather proof roof coverage on all sides that are not
Must be followed carefully to avoid personal injury.
Must be followed carefully to avoid damage or incorrect installation.
Must be followed carefully to avoid damage or incorrect installation.
READ AND SAVE THESE INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
telephone number listed in the warranty.
Copyright © 2020
Copyright © 2020 Trade-Wind Manufacturing, LLC
INSTALLATION INSTRUCTIONS &
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
USE & CARE GUIDE
®
Trade-Wind
P7200 Series BBQ Hood
P7200 Series BBQ Hood
Proverbs 22:29
Proverbs 22:29
Page
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the P7200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trade-wind P7200 Series

  • Page 1 ® Please be advised that the Trade-Wind P7200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area 200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress.
  • Page 2 4. Do not use this unit with any solid-state speed control device. state speed control device. 5. This unit must be grounded. Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 3 Ducted fans must always be vented to d) Ducted fans must always be vented to the outdoors. e) For safe and secure wall mounting, the TRADE-WIND ® BBQ Hood should be mounted to a solid vertical surface e) For safe and secure wall mounting, the Hood should be mounted to a solid vertical surface of sufficient width to allow for mounting of the Hood.
  • Page 4 PDC7260- EXT KIT for P7260 PDC7272 PDC7272- EXT KIT for P7272 Included duct cover for up to 10' ceilings Optional duct cover extension for ceilings up to 12' Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 5 Unit is now ready for mounting and installation. Re-install baffle filters as final step after installation is completed. See next page for drawings depicting the unit after conversion. Revised 5-21-20 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page...
  • Page 6 BACKVIEW Model # (No Blower) (1200 CFM) P7236 P7236-12 P7242 P7242-12 P7248 P7248-12 BACKVIEW Model # (No Blower) (2300 CFM) P7260 P7260-23 P7272 P7272-23 Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 7 The neutral wire (white) must only be connected to the white neutral wire coming in from the electrical panel. House Electrical House Electrical Panel Green or bare wire White 120V Black (L) Hood Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 8 Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 9 Some features may be slightly different than shown on product literature. Some features may be slightly different than shown on product literature. ® For more information, please contact your Trade For more information, please contact your Trade-Wind Representative Representative 800 West Grant Street, Phoenix, AZ 85007...
  • Page 10 Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 11 ½ of a 10” round duct is 5”. 3.1416 is “Pi”, the “constant” ½ of a 10” round duct is 5”. 3.1416 is “Pi”, the “constant” used when calculating the area of a circle. Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...
  • Page 12 *Required dimensions for roof cap - Minimizes static pressure and maximizes air flow to ensure optimum pressure and maximizes air flow to ensure optimum performance of your Trade-Wind product. Wind product. Revised 5-21-20 Copyright © 2020 Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29 Proverbs 22:29 Page...